Procedures of BMW Ediabas/INPA Win XP/Vista Installation: Step 1 – Prepare the laptop. First, you have to make a tiny change to the Windows environment variables. Scary than it sounds. INPA relies on a file called API.DLL being in a folder that is set in the. Windows “path” so you need to add the EDIABAS folder to the path. BMW CODING TOOL. DIS V57 und DIS V44 CIP Pre-Installed. Acronis IBM T30 native Dual boot DIS V57 and SSS V41. INPA Version 5.06 + F-SERIES. CUSTOM VERSION INPA (32&64 bit) Autoinstaller. NCS Expert V4.01(32&64 bit) UPDATE WITH LATEST V66 SP-Daten. BMW AiCoder 5 for F-series.

BMW INPA & Ediabas 5.0.2 full English version for BMW from 1998 to 2008 installation tutorial here.

The software CD will come to you with the INPA K+CAN interface, only €17 with free shipping, enjoy shopping here:

This New BMW INPA K+CAN is great designed With FT232RQ Chip has a Switch which turns LEFT is for 7 pin, RIGHT is for 8 pin (8 pin is for K-LINE protocol, old DCAN cable cannot do this).

Note: the guidance especially for Windows XP users.

Before installing, delete all version of INPA-ADS from your computer.

Insert CD to disk E: and open it, there will be a file named “INPACANinstall” which will guide you how to install in detail.

Step1: Open “01_Step1” file in the root of CD disk and copy folder “EC-APPS” onto disk C:

Step2:Run the file “01_Step1NFSEntpacktdisk1SETUP.EXE”

Choose “Windows XP” and click next

Choose “User Mode” and click next

Choose 1 -> OBD ->“Kein API-TRACE” ->“Kein IFH-TRACE” ->“Komfort(.IPO)” and click next

Then press any key to continue

This step Complete

Step3: Run the file “02_Setup2INSTALLInstprog.exe”

Choose English, press continue

While choosing the HDD disk C: for initial setup, do not change, the installation must be on drive C: only, press continue

Choose configuration “BMW Group Rectification Programs UK” and press continue

Activate all spare boxes with:

EDIABAS 6.4.3 – UPDATE

INPA 5.0.1- UPDATE

NCS Expert 3.0.8 – Complete

Press continue to start installation and press End to exit the installation

Step4: Run the file “03_Setup3INSTALLInstprog.exe”

-Choose English, press continue, press continue again

-While choosing the HDD disk C: for initial setup, do not change, the installation must be on drive C: only, press continue

-Choose configuration “BMW Group Rectification Programs UK” and press continue

-Activate all spare boxes with:

INPA 5.0.1- UPDATE

NCS Expert 3.0.8 – UPDATE

Press continue to start installation and press End to exit the installation

Step5:

Bmw Inpa Xp For Sale

Find the file C:EC-APPSINPACFGDAT named “inpa.ini” and replace it with the file “inpa.ini” that is in the root directory of CD disk

Step6: Plug the adapter into spare USB-Port and install drivers manually

Copy the “Driver_D_CAN_USB” file onto disk C:

Choose install from a list of specific location

Select the folder “Driver_D_CAN_USB”

You may install the same driver again

Complete driver installation

Then Change the number of COM-port to the value from 5 to 1, also change the value of Latency Timer from 16 to 1.

Bmw Inpa Install Windows Xp

Step7: open disk C:EDIABASBINEdiabas.ini

In the file “EDIABAS.ini”

“Interface = STD:OBD” must be choosen

Step8: in the file C:WindowsOBD.INI, put the number of USB-COM-port to the value

Step9: Run the file “Driver_D_CAN_USBOBDSetup.exe”

After doing these, you should RE-BOOT the computer

Bmw Inpa Xp

Step10: test

–Connect BMW car with laptop via INPA cable ( via USB Port and OBDII port)

-Turn ignition on

-Run the INPA from: C:EC-APPSINPABINinpaload.exe

-Choose the model of BMW and type of modells you want to see

-Close the soft and disconnect the INPA cable from USB Port each time you change the car connect.

Bmw Inpa Windows Xp

Done!